"Arch Duke Maxyenko, Shit Talk Extraordinaire" (arch-duke-maxyenko)
08/07/2016 at 13:10 • Filed to: Streetrod nationals | 3 | 7 |
Bluecold
> Arch Duke Maxyenko, Shit Talk Extraordinaire
08/07/2016 at 16:18 | 0 |
To this day I still do not understand the 6 carb barrels on 8 cilinders arrangement.
1 - okay I get it, carbs are expensive
2 - 1 per cilinder bank, sure that seems logical. Still a bit cheap but okay
4 - 1 barrel per 2 cilinders seems a good compromise
8 - damn straight, one barrel per cilinder, no complicated heavy manifold, velocity stack the way it is supposed to be
Where does 6 fit in? Not one barrel per cilinder. Not the economy of a single four barrel, still a complex manifold. Why not just get a bigger four-barrel?
Arch Duke Maxyenko, Shit Talk Extraordinaire
> Bluecold
08/07/2016 at 16:25 | 0 |
One primary and two secondary carbs.
The 4 barrel carb has two primary barrels and two secondary barrels that open when the throttle is opened up enough. A two barrel carb is the same, but half. Dual quad was a system that had two 4 barrel carbs. The problem with the 8 stack setup is tuning can be incredibly difficult.
Bluecold
> Arch Duke Maxyenko, Shit Talk Extraordinaire
08/07/2016 at 16:33 | 0 |
Isn’t that solved using idle, progression and cruise circuits?
Arch Duke Maxyenko, Shit Talk Extraordinaire
> Bluecold
08/07/2016 at 16:37 | 0 |
With fuel injection, yes. But with carbs it’s a whole different animal.
http://www.carburetion.com/Weber/adjust.h…
Bluecold
> Arch Duke Maxyenko, Shit Talk Extraordinaire
08/07/2016 at 17:21 | 0 |
What little carburetor things I know are from Weber and Dell’orto sidedrafts. I always thought there were three circuits in total.
http://www.tr3a.info/WeberDCOEinfo.… (and other sources)
Arch Duke Maxyenko, Shit Talk Extraordinaire
> Bluecold
08/07/2016 at 17:30 | 1 |
Yes, but they still all have to be tuned just right on all 8 or they don’t work worth a damn.
Bluecold
> Arch Duke Maxyenko, Shit Talk Extraordinaire
08/07/2016 at 17:40 | 0 |
that does make sense. thanks